Home Up Contact Us

Solid & Chemicals
Non Potable Water Solid & Chemicals Drinking Water



Solid & Chemical Materials

Method EPA 1311
  • TCLP
Method EPA 9050
  • Conductivity
Method EPA 200.7
  • Phosphorus
Method EPA 9095
  • Paint Filter Liquids Test
Method EPA 9045
  • Corrosivity
  • pH
Sample Acceptance Criteria
Please review our sample acceptance criteria before sending your samples for analysis.
  1. Samples must be submitted with a completed chain of custody. (PDF available)
  2. Use appropriate containers with required preservatives.
  3. Use water resistant ink to mark sample container with sample name, date, and time of sample collection.
  4. Adhere to sample holding times.
  5. Samples must be received with ice in container.
  6. All drinking waters samples must be submitted in laboratory approved containers.
  7. Samples will not be accepted if ice is not present, or if the holding time is exceeded.                

Note: If a sample does not meet the acceptance criteria, the decision to proceed with the analysis will be determined by the client.

Analysis Request Form
For your convenience, you can download our analysis request form.
This PDF document allows you to fill in information before printing the form, or you can fill in the information by hand.
       If you do not already have the adobe reader, you can download a free reader at Adobe's website: Download Adobe Acrobat Reader Software



Send mail to MarioRodriguez@aainc.biz with questions or comments about this web site.
Last modified: 11/15/12